TC-Helicon voicelive rack User Manual Download

Page: 57 / 89

The Edit Button

WAVE

This lets you choose the modulation waveform
from Square,Triangle or Sine to vary the periodic

nature of the modulation effect.

XFB L / XFB R

These send cross feedback from the left and right
delay lines (XFL L) and from right to left (XFR
L). Cross feedback returns the delayed audio to
the opposite side’s delay line. This can produce

interesting stereo effects.

LOWCUT L / LOWCUT R &

HICUT L / HICUT R

These gentle highpass (LOWCUT) and low pass
(HIGHCUT) filters control the bandwidth of the
µMod feedback paths. These are very useful for

tailoring Flange effects.

LEAD To UMOD

Sets the amount of lead voice sent into the
µMod block.

HARM To UMOD

Sets the amount of harmony level sent into the

µMod block. The HARMONY effect must be on

to feed this send.

LEAD LEVEL

Controls the lead (dry + Tone) voice level when

the individual effect is turned on with its respec-

tive footswitch. This allows a unique wet/dry mix

for individual effects. When multiple effects are

active, the lowest LEAD LEVEL value will deter

mine the value.

Note that the LEAD EFFECT SENDS parameter
on the PRESET tab must be set to PRE in order

for any signal to get to the effect block when

LEAD LEVEL is set to OFF.

Summary of Contents for voicelive rack


























































































Search results

Summary of Contents for voicelive rack

Reviews:

Related manuals for voicelive rack

Brands by name

Popular brands

TC-Helicon voicelive rack, User Manual

Search results

Summary of Contents for voicelive rack

Reviews:

Related manuals for voicelive rack

Brands by name

Popular brands