background image

Example: 
Tapping the tempo using the TAP/TEMPO switch

Tap quarter notes on the TAP TEMPO switch. 
The TAP/TEMPO LED indicates the tapped tempo,
and the delay repeats will play according to the
subdivision set with the DIVISION button.

You can also tap the tempo this way when the pedal is
bypassed, which comes in handy when you want to
change the tempo for an upcoming song.

Example: Audio-tapping the tempo:

Press and hold the TAP/TEMPO switch. When the
outputs are muted, play steady short quarter notes
on your instrument. 
The TAP/TEMPO LED indicates the tapped tempo.

Release the TAP/TEMPO again. 
The delay repeats will play according to the
subdivision set with the DIVISION button.

That’s it – you have now entered the global tempo by
audio.

OPERATION

14

Thank you for spending time reading this manual. 

We hope that you are well on your way with NOVA
Repeater and enjoy using it already!
Should this manual leave any of your questions
unanswered, please use the TC Support service,
which you can access from www.tcelectronic.com.
Over a period of time, we will collect the most
frequently asked questions and update the manual
accordingly. Manual updates are available for
download on our website in PDF format. You will find
the current manual revision number at the bottom of
page 3.

Summary of Contents for NOVA Repeater RPT-I

















Reviews: