TC Electronic NOVA Repeater RPT-I, User Manual

Page: 13 / 16

13
EN
With Kill Dry active, the dry signal is removed
completely from NOVA Repeater’s signal path.
15 – RANGE Button
The delay time is set using the DELAY knob. For best
and most accurate control of the delay time, we have
split the available Delay time range in three sections.
Press the RANGE button to toggle between 20-400
ms, 300 to 600 ms and 500 to 1200 ms.
Please note that although you cannot dial in
more than 1200 ms of delay time, you can tap
up to 2290 ms.
16 – TYPE Button
Press the TYPE button to toggle between the various
delay types. See also “11/16 – TYPE Indicator and
Button” on page 10.
17 – DIVISION Button
Press the DIVISION button to toggle between the
OPERATION
various sub-division types. See also “12/17 – DIVISION
Knob and Subdivision Display” on page 11.
18 – ON/OFF Switch and LED
This is the ON/OFF switch for NOVA Repeater. A red
LED just above the switch indicates the pedal’s status.
When it is lit, the pedal is active.
19 – TAP Switch and LED
There are several ways to set the NOVA Repeater’s
delay time. The easiest way is turning the DELAY knob
to set the delay time within the selected delay range.
However, you can also set the delay time using the Tap
tempo and subdivision function, which is very intuitive.
The Tap tempo can be entered in two different ways:
•
by rhythmically tapping the TAP/TEMPO switch
• by using the Audio Tap Tempo™ feature.
continued.........