TC Electronic Konnekt Live, User Manual

Page: 18 / 60

12 DAW Main - meters and fader
This section of the mixer handles the
monitoring of the main outputs from
your DAW. Having the controls at this
place allows you to mix the channels
with the DAW signal, right here on the
Mixer page instead of having to switch
between the programs.
13 Effect Return level - Fabrik R Live
The reverb plug-in Fabrik R Live is set up on a bus
that you can send to from each channel. The return
level of this bus is set using this Effect Return level
controller.
14 Monitor Mixer - Main Out level
This is where you set the output level for the monitor
mixer. The output from the mixer can be sent to any
of the physical outputs (Line 1+2, 3+4, S/PDIF or
ADAT).
THE CONTROL PANEL - MIXER PAGE
16
You can instantly mute a channel by holding
ctrl+shift and click on the fader handle.
11 Digital Channels
The configuration of the digital channels is set via the
Setup page. Please refer to the description on the
following pages.