TC Electronic Konnekt Live, User Manual

Page: 12 / 60

Connect a TV, a radio tuner or any secondary
device that you don’t use in music production to
Line inputs 1/2 on the rear panel. Use the “Line
In” switch to alternate between front and rear
panel inputs.
8 Source Level (push to control Pan)
Controls the level or pan-position of the selected
channel. The lightring shows the level or pan position
of the selected channel.
By default the Source Level knob controls the source
level of the selected channel. Press once and turn the
knob to pan the signal. Leave the knob untouched for
1 second and it will automatically return to volume
control function.
9 Monitor LEDs
Indicate which channel is monitored. Select channels
using the Ch. Select button.
10 Ch. Select
The LED lightring around the SOURCE level knob
indicates the source level of channel you have
selected or the pan position if the Source Level knob
(8) has been pushed.
Select between monitoring the following channels:
Ch 1 - Front or rear panel input channel 1*
Ch 2 - Front or rear panel input channel 2*
Select between channel 1/2 front and
rear panel using the Line in switch on the
front panel.
Ch 3/4 - Channels 3/4 on rear panel
User - The Setup page allows you to setup which
channel/channels are monitored when
“User” is selected. The options will vary
depending on the connected devices.
line in
ch1/2 on
rear panel
m
It is also possible to assign a level control of a channel to
the LED lightring via the Mixer page on the TC Near
computer user-interface by pressing the lightring icon on
the channel of your choice:
11 Output level
Sets the output level of analog outputs 1-2 and of the
headphone outputs.
12 DSP Total Recall
Three program settings can be stored in locations P1,
P2 and P3. These programs are total recall presets
recalling settings from both mixer page, setup page
and plug-in pages. Total recall of Fabrik plug-in
settings does not apply when routing is set to plug-in
mode.
13 Phones muting
Connect a set of headphones here. Main outputs will
be muted.
14 Phones non-muting
Connect a set of headphones here. Signal is still
passed to Main outputs.
FRONT PANEL OVERVIEW
10