______________________________________________________________________________________________________________________________________________________________________________
__________________
TC Electronic A/S
Finalizer Express Service manual
page 15
Technical Specifications
Digital Inputs and Outputs
Connectors:
XLR (AES/EBU)
RCA Phono (S/PDIF)
Optical (Toslink)
Formats:
AES/EBU (24 bit),
S/PDIF (24 bit), EIAJ CP-340, IEC 958,
EIAJ Optical (Toslink)
Output Dither:
HPF TPDF dither 16, 20 and 24 bit
Sample Rates:
44.1 kHz, 48 kHz
Processing Delay:
0.2 ms @ 48 kHz
Frequency Response DIO:
DC to 23,9 kHz ± 0,01 dB @ 48 kHz
Compressor THD+N:
-122 dB (0,00008%) @ 10 dB Comp, 20 Hz to 20 kHz
Analog Inputs
Connectors:
XLR balanced (pin 2 hot)
Impedance:
20 kohm
Max. Input Level:
+22 dBu (balanced)
Min. Input Level (for 0 dBFS): -10 dBu
Sensitivity:
@ 12 dB headroom: -22 dBu to +10 dBu
A to D Conversion:
24 bit (1 bit, 128 times oversampling)
A to D Delay:
0.8 ms @ 48 kHz
Dynamic Range:
>103 dB (unweighted), >106 dB(A)
THD:
-95 dB (0,0018 %) @ 1 kHz, -6 dBFS
(FS @ +16 dBu)
Frequency Response:
10 Hz to 20 kHz: +0/-0.2 dB
Crosstalk:
< -80 dB, 10 Hz to 20 kHz
typical –100 dB @ 1 kHz
Analog Outputs
Connectors:
XLR balanced (pin 2 hot)
Impedance:
100 ohm (active transformer)
Max. Output Level:
+22 dBu (balanced)
Full Scale Output Range:
-10 dBu to +22 dBu
D to A Conversion:
24 bit (1 bit, 128 times oversampling)
D to A Delay:
0.57 ms @ 48 kHz
Dynamic Range:
>100 dB (unweighted), >104 dB(A)
THD:
-86 dB (0.005 %) @ 1 kHz, -6 dBFS
(FS @ +16 dBu)
Frequency Response:
10 Hz to 20 kHz: +0/-0.5 dB
Crosstalk:
< -60 dB, 10 Hz to 20 kHz
typical –90 dB @ 1 kHz
EMC
Complies with:
EN 55103-1 and EN 55103-2,
FCC part 15 class B,
CISPR 22 class B
Safety
Certified to:
IEC 65, EN 60065, UL 1419 and CSA E65
Environment
Operating Temperature:
32° F to 122° F (0° C to 50° C)
Storage Temperature:
-22° F to 167° F (-30° C to 70° C)
Humidity:
Max. 90 % non-condensing
PCMCIA Interface
Connector:
PC Card, 68 pin type 1 cards
Standards:
PCMCIA 2.0, JEIDA 4.0
Card Format:
Supports up to 2 MB SRAM
Control Interface
MIDI:
In/Out/Thru: 5 Pin DIN
GPI, Pedal, Fader:
¼" phone jack, 0 ohm to 50 kohm
General
Finish:
Anodized aluminum front
Plated and painted steel chassis
Dimensions:
19" x 1.75" x 8.2" (483 x 44 x 208 mm)
Weight:
5.2 lb. (2.35 kg)
Mains Voltage:
100 to 240 VAC, 50 to 60 Hz (auto-select)
Power Consumption:
<20 W
Backup Battery Life:
>10 years
Warranty
Parts and labor:
1 year
Note: Due to continuous development and standardization all specifications are
subject to change without notice
