5
Congratulations on your purchase of the TC Electronic D22 broadcast delay.
Researching the broadcast scene, TC Electronic found demands for a “state of the art” broadcast delay dedicated to sync audio to motion
pictures. With TC’s experience on Digital Delay we found it natural to comply with a product in this category.
Therefore TC now proudly presents the D22 broadcast delay unit with Seamless Update, adding no clicks, pitch changes or noise,
as one of the main features.
Main Features
- Seamless Delay update:
No clicks, pitch changes or noise.
- 5200ms* Delay pr. Channel (two channels).
- 24 bit A/D-D/A converters.
- Digital I/O's: AES/EBU, S/PDIF,
Wordclock BNC 75ohm.
- Sample Rates: Internal 44.1, 48kHz,
External 32, 44.1 and 48kHz.
- Total recall via programmable setups/presets.
- Tap Delay time - Instant or Preview.
INTRODUCTION
- Delay time in: Frames, Fields, Milliseconds, Meters
or Feet.
- Separate Dial and Nudge keys for Delay time adjustment.
- Independent resolution for Dial wheel and Nudge keys.
- Built in Digital Output fader (remote controllable).
- Remote capabilities: RS-485 (Input only) for Recall Setup,
Delay time adjustment.
- GPI (General Purpose Impulse) for External control of digital
fader, Tap Delay time and Bypass.
- User Interface Lock mode for "Set & Forget" purposes.
- Sample Rate Converter.
*
The extension allowing a Delay time of 5200ms is installed from serial number 2000912 and up.
Max Delay time is now 5200 ms at all sampling frequencies (32K or 44.1K or 48K)(D22 cannot run 96K!)
Max number of Delay frames is now 157 frames (@30fps).
Please contact you local dealer or TC Electronic for information on upgrade procedure if you own a unit with a serial no below 2000912.
