Wire
Function
Black
GND
Red
+5V (leave unconnected)
White
RSSI signal
Next, enter the CORE configuration menu and select the correct RSSI protocol type for your receiver (ANALOG
or DIGITAL). The configuration will also ask you to turn on and off the transmitter to record the min. (0%)
and max. signal level (100%).
You can even connect an EzUHF receiver using a LINK cable (available separately) to get extended telemetry
data. No configuration needed other than selecting LINK protocol on the RSSI menu.
Audio downlink
The CORE PNP25 comes configured with an on-board microphone and feeds this to the video transmitter
(camera cable audio input is unconnected).
To adjust the gain, open the case and turn the trimpot next to the mic.
If you want to feed a different audio source or telemetry instead, change the AUDIO bridge from MIC to EXT.
Connect an audio signal to the
white
lead on the CAM input.
26
