Next, with a new model set up on the radio and the receiver bound to the transmitter, attach the video
transmitter antenna and connect a LiPo battery to the GEMINI to power the R/C receiver (USB will not provide
power to the receiver).
Open the “Input” view and click “Start Configuration Wizard” to initiate the stick-to-channel recognition
process. Also complete the failsafe stage. You can skip the last auxiliary accessory switch steps.
If the controls are not recognized, check that the receiver outputs the right signal and trace the signal wire to
ensure a proper connection.
The final mapping will be shown in the main view, you can fine adjust and tweak settings if needed. Your
setup will differ from what is shown in the following image.
12
