Motor mount
If you are going to use your current setup or motors with short motor wires, it is necessary to extend the motor
wires to reach at least the length of the tubes, plus 20%. Wire gauge should be 18 to 20 AWG. Heatshrink to
protect against short-circuit.
The motors arrive in two turning directions (clockwise, CW; counterclockwise, CCW). The white dot marks
motors that are turning counter-clockwise, to be positioned on the arms for motor M1 and M3. Prepare the
motor mount part; top motor mount, boom support part and M3x8mm screw.
9
