TBK-NVR2300 Network Video Recorder User Manual
64
After having successfully added the IP SAN disk, return to the HDD Information menu. The added
NetHDD will be displayed in the list.
If the installed HDD or NetHDD is uninitialized, select it and click
Init
for initialization.
Configure eSATA for Data Storage
When there is an external eSATA device connected to the device, you can configure eSATA for the
data storage, and you can manage the eSATA in the device.
Click
Storage
>
Advanced
.
Select the eSATA type to Export or Record/Capture from
eSATA
.
Export
: Use the eSATA for backup.
Record/Capture:
Use the eSATA for record/capture. Refer to the following steps for operating
instructions.
When the eSATA type is set to Record/Capture, enter the storage device interface.
Edit the property of the selected eSATA, or initialize it as required.
Configure eSATA for Auto Backup
After you set an auto backup plan, the system will back up the local record files to eSATA. It will
back up the record files 24 hours ahead of the backup start time.
Before you start
Ensure the device has correctly connected with an external eSATA hard drive, and its usage type is
set as
Export
. Refer to
7.1.3 Configure eSATA for Data Storage
for details.
Go to
Storage
>
Auto Backup.
Check
Auto Backup
.
Set the backup start time in
Start Backup at
.
If the day experiences a failed backup, the device will back up the record files 48 hours ahead of
the backup start time in the next day.
Select channel(s) for backup.
Select
Backup Stream Type
as your desire.
Select
Overwrite
type.
Set eSATA Mode