TBK-NVR2300 Network Video Recorder User Manual V2
107
Configure the e-mail settings.
Go to the
Linkage Action
interface of the alarm detection (e.g., motion detection, video tampering,
face detection, etc.).
Select the
Send
alarm linkage action.
Trigger Alarm Outputs
The alarm output can be triggered by the alarm input, motion detection, video tampering
detection, face detection, line crossing detection, and any all other events.
Go to the
Linkage Action
interface of the alarm detection (e.g., motion detection, face detection,
line crossing detection, intrusion detection, etc.).
Click the
Trigger Alarm Output
tab.
Select the alarm output (s) to trigger.
Go to
System
>
Event
>
Normal Event>Alarm Output
.
Select an alarm output item from the list.
Refer to Chapter 11.6.3 Configure Alarm Output for the alarm output settings.
Configure PTZ Linkage
The system can trigger the PTZ actions (e.g., call preset/patrol/pattern) when the alarm event, or
VCA detection events occurs.
Make sure the connected PTZ or speed dome connected supports PTZ linkage.
Go to the
Linkage Action
interface of the alarm input or VCA detection (e.g., face detection, line
crossing detection, intrusion detection, etc.).
Select the
PTZ Linkage
.
Select the camera to perform the PTZ actions.
Select the preset/patrol/pattern No. to call when the alarm events occur.