3
Sufficient safety distance, especially to personnel, must be considered
when assembling the device. Performers and participants must be clear of
the safety distances beforehand, and the operation must be rehearsed. In
dangerous situations the device must immediately be shut down!
The sideway safety distance in still air is 2 m.
The safety distance above the nozzle is 7 m.
Maintenance on the device may only be performed by the qualified
personnel of the manufacturer. The casings of the Jet-Master or the
control panel must not be opened. Risk of electric shock!
By opening the casings of the Jet-Master or the control panel any
guarantee and/or warranty expires and we assume no liability for
consequential accidents and damage to persons and/or property.
Only original parts from the manufacturer may be used for the assembly
and operation of the device. The usage of other parts can lead to severe
damage to persons or property.
3. Start-up
The initial operation may only be carried out after complete assembly of all
necessary components and safeguards by trained personnel, in
consideration of all topics addressed in these safety instructions and the
operating manual. We disclaim liability for faulty start-up carried out by
an untrained third party, and the warranty expires.
4. Operation
ATTENTION: DO NOT TRIGGER THE Jet-MASTER LONGER THAN 5
MINUTES!
The operation of the unit is only allowed for the designated purpose, within
the boundaries of design, by trained personnel. We assume no liability for
inappropriate use, which can lead to severe damage to persons and/or
property. Furthermore, warranty expires.
In dangerous situations the device must immediately be shut down and
disconnected from the power source.
Make sure that all high-pressure hoses and connections are intact.
Defective or damaged parts must not be used.
!
!
!
!
!
!
!
