BML battery monitor manual
TBB POWER CO., LTD.
Cable-Flex-50/30 or Cable-Flex-25/30
Cable-Flex-50/30 and Cable-Flex-25/30 are to connect between battery negative connector and
BAT- connector of current detector module (SS or SH).
Installation Request
Work temperature: -20
～
60
℃
Storage temperature:-40
～
85
℃
Cooling: Natural cooling
Humility: 0%-95% non-condensing
Install the unit at the location where has well ventilation.
Recommended working temperature is 0
～
25
℃
Recommended humility is around 50%
Installation
Professional electrical technician is required for the installation.
Please make sure BML is powered off during the installation which means the connection
between Cable-BM/03 and Cable-Starter-Batt-Volt/01 BAT+ / Cable-Service-Batt-Volt/01 S-BAT+ is
the last step of the installation.
Please make sure all of the equipments are powered off during the installation.
The location of SS/SH is recommended to be as close as possible to the battery. Shorter cable
between SS/SH and battery is better.
T1
T2
