- 5 -
Two generators – DUO MODE
The most important benefit compared to other frequency devices is that the F-SCAN MOBILE NT
DUO is equipped with a second generator which can be used to provide a different frequency on
another wire of the application cable to the PP (=DUO) port. This means: two devices in one.
Frequency Specific Microcurrents FSM applications can easily be generated. When using the device
in standard mode, the second generator creates the same signal as the master generator. When using
in DUO MODE, the second generator outputs the frequency from the even number of a running
program as described in the chapter
DUO MODE
.
First steps
The charge level of the Lithium-Ion battery of the F-SCAN MOBILE NT DUO must be checked first
after the device and its accessories have been unpacked.
CHARGE YOUR F-SCAN MOBILE NT DUO BEFORE FIRST USE FOR AT LEAST 4
HOURS. CONNECT THE DEVICE AND THE POWER SUPPLY WITH THE USB CABLE
AND PLUG THE POWER SUPPLY INTO AN AC-OUTLET. IF THE DEVICE IS POWERED
ON DURING THE CHARGING PROCEDURE, LESS ENERGY FOR ENERGIZING THE
BATTERY PACK IS AVAILABLE AND THE CHARGING PROCEDURE TAKES LONGER.
THE LCD MAY SHOW APPEARING AND DISAPPEARING STRIPES DURING THE
CHARGING AND THE DEVICE MAY WARM UP SLIGHTLY. THESE EFFECTS ARE
NORMAL.
IF YOUR DEVICE IS EQUIPPED WITH WIRELESS CHARGING OPTION: Place the F-
SCAN MOBILE NT DUO on the charging pod in the center so that you can see the
indicator light on the pod changing from red to blue.
