- 20 -
- “SAVE COMPACT” to save all of the 100 program positions, which hold frequencies, on the
ChipCard for use in an F-SCAN COMPACT.
- “LOAD COMPACT” to overwrite the 100 program positions of the F-SCAN MOBILE with the data
from an F-SCAN COMPACT. DIRP- data sets previously stored in program positions in the
F-SCAN MOBILE will be lost.
- Touch “MinDevice” to store the frequency values of the program position presently selected, in the
F-SCAN MOBILE on the ChipCard for use in a MinDevice.
- Touch “Load single protocol” to load just a single program into the device memory. If selected, a
menu opens with the list of all programs which are stored on the ChipCard. Press on the desired
program and this program will be stored in the device in the first empty memory location. If the
entire memory is used, the memory number 1 will be used.
Removal of the ChipCard from the slot resets the F-SCAN MOBILE NT to the menu before the
ChipCard was inserted.
Important: when loading or saving from or to the ChipCard, the memory area of either “123” or “DUO”
will be affected. This means, if you want to load or save programs from/into the device from the “123”
memory area, you must select “123” prior to insertion of the ChipCard. If you want to load or save
programs from/into the “DUO” memory area, you must select “DUO” prior to insertion of the ChipCard.
This is valid for standard ChipCards as well as for ChipCard PLUS.
Use of the ChipCard PLUS
The following menu opens when a ChipCard PLUS is inserted into the slot:
-
Touch “BACKUP” to store the content of the memory with the 100 program positions on the
ChipCard PLUS.
-
Touch “RESTORE” to overwrite the 100 program positions of the F-SCAN MOBILE with the data
from the ChipCard PLUS.
-
Touch BACKUP ABC LIST to store the ABC list on the ChipCard PLUS.
-
Touch RESTORE ABC LIST to copy the ABC list from ChipCard into the device. An already
installed ABC list will be overwritten.
