1. Net A End Fitting
2. Security Cap
3. High Tensile Bolt
4. 400 Diameter,
1mm Plastic Washer
5. Nyloc Nut
6. Security Cap
7. Net B End Fitting
1
2
3
4
5
6
7
3)
Repeat Steps one and two with the second half of the net. Using
the shoulder bolts shown, to the top of the page, connect the two
halves of the net together. All three turnbuckles should now be
tensioned evenly until the masts are vertical.
4)
When a 50kg weight is applied to the perimeter rope at the swivel
connection this should Deflect approximately 100mm, as shown below,
when the net is correctly tensioned. Do not over tighten the net.
5)
Connect the second bow shackle on the loop of wire to the safety
anchor.
6)
Finally secure the corner boxes with their lids using the
security bolts supplied.
A 50kg weight
applied here
will give
approximately
100mm
deflection
when the net
is correctly
tensioned.
Product TwinAct4000-R1 Produced by Tayplay Ltd
Product
TwinAct4000-R1
Page Seven
