16095
17095
10779
11779
1066
Product TwinAct4000-R1 Produced by Tayplay Ltd
Product
TwinAct4000-R1
Page Two
Rigging Screw
x6
Central Spigot
x2
Corner Box
x6
Corner Anchor
x6
Space requirements & Safety
Clearances
The requirements for space and safety
clearances are extracted from the
following standards BS-EN1176-1
BS-EN1176-1 Section 4.2.8
Zones
BS-EN1176-1 Section 4.2.8.2.3
Free space
The equipment should be situated to
allow 2.0m free space from the edge
of the product at ground level.
Total area required based on square
layout is 201.3m2.
Finished assembly showing the
recommended safety zones
Free Height of fall
The maximum height at which a child can
stand, and fall unimpeded is 1066mm, the
highest point on the perimeter rope. This
is considered to be the free height of fall
according to BS-EN 1176 part 11 section 4.3
and therefore a mininum safety surface of
16095x10779 is required.
Installation instructions
The
Twin
Active 4000
Activity Net is delivered in three sections.
Section One is the polished stainless steel masts which is to be mounted over the
central spigots of the foundation steelwork leaving the top of the masts to accept
the aluminium domes. This is attached to the top of the net.
Section Two is the two halves of the net, complete with aluminium domes to be
inserted into the top of the mast. There are also five shoulder bolts with security
bolts for attaching the two halves of the net.
Section Three is the foundation steelwork. This comprises of six galvanised corner
anchors, two central galvanised spigot and six safety anchors. The package will
also contain six rigging screws for attaching and tensioning the net at each corner
to the foundation steelwork.
Section Four is the galvanised corner boxes in flatpack form, with fittings.
Safety Anchor
x6
