3
Model R280
M
CAUTION!
This machine must be placed on a
level surface. Use caution when moving the machine.
Failure to comply may cause the machine to tip over and
result in personal injury.
NOTICE!
Cleaning and sanitizing schedules
are governed by your federal, state, or local regulatory
agencies and must be followed accordingly. Please see
the cleaning section of this manual for the proper
procedure to clean this machine.
NOTICE
all warning labels that have been attached to
the dispenser to further point out safety precautions to
the operator.
IMPORTANT!
If the crossed-out wheeled-bin
symbol is affixed to this machine, it signifies that this
machine is compliant with the EU Directives as well as
other similar end-of-life legislation in effect after August
13, 2005. Therefore, it must be collected separately after
its use is completed and cannot be disposed as unsorted
municipal waste.
The user is responsible for delivering the machine to the
appropriate collection facility, as specified by your local
code.
For additional information regarding applicable local
disposal laws, please contact the municipal waste facility
and/or local authorized Taylor distributor.
WARNING
! Only install this machine in a
location where its use and maintenance is restricted to
trained personnel. Failure to comply may result in
personal injury.
Equipment Safety
Important:
•
Turn the power switch OFF and disconnect the
dispenser power cord from the wall outlet before
cleaning, moving, or servicing the dispenser.
•
Inspect the dispenser on a regular basis to identify
potential problems before they occur.
•
Keep the Dispenser clean.
•
Keep hands away from the accumulator doors and
dispenser drums while the Dispenser is operating.
•
Fry baskets may be hot. Pick them up by the handles
only.
•
Do not
roll the Dispenser to the back sink for
cleaning. This will cause unnecessary wear on the
Dispenser.
•
If the power cord is damaged it must be replaced by
the manufacturer, or its service agent, or a similarly
qualified person in order to prevent a hazard.
•
Use only the power cord that came with the
Dispenser.
Do not
use an extension cord.
•
Do not
modify the power cord.
•
In a safety emergency, immediately disconnect the
power cord from the wall outlet.
•
Do not
obstruct access to the wall outlet or place
pressure on the power cord.
•
Do not SPRAY THE DISPENSER WITH LIQUID OR
SOLVENTS.
It is not sealed against jetting fluids, and
contamination may get into sensitive components.
Spraying the Dispenser may void the warranty.
•
Use caution when handling heavy parts such as back
and top panels.
•
Always re-install service panels when maintenance is
complete.
•
Keep machine upright at all times.
•
Keep ventilation openings in the machine enclosure
clear of obstruction.
•
Do not
use mechanical devices or other means to
accelerate the defrosting process, other than those
recommended by the manufacturer.
Do not
drill or
otherwise puncture cabinet walls or top.
•
Do not
damage the refrigerant circuit.
•
Do not
use electrical appliances inside the food
storage compartments of the machine unless they
are of the type recommended by the manufacturer.
•
Do not
store explosive substances such as aerosol
cans with a flammable propellant in this machine.
