6
Model R280
Dispenser Assembly
Note:
Before assembling the Dispenser it is
recommended that all parts be cleaned, sanitized, dry,
and handled in a sanitary manner. See Disassembly,
Defrost, and Cleaning on page 8 for more information.
1. Open the cabinet door. Accumulator doors are
pre-installed.
2. Install the left and right flap doors by slipping them
under the accumulator doors and seating the pivot
pin into the plastic pivot blocks, as shown below.
(accumulator doors are hidden for clarity in Figure 4).
Figure-3
Figure-4
3. Install the left and right accumulator housings over
the accumulator doors.
Figure-5 : Accumulator Housing Assembly
Note:
Accumulator housings, drums, and fry diverters
are universal to left and right positions within the cabinet.
The hoppers and basket trays are
not
universal to the left
and right positions of the cabinet.
4. Install the fry diverters in the hoppers by sliding the
fry diverter tabs into the slots located on the inside
hopper walls.
Figure-6 : Fry Diverter Assembly
5. Install drums into the hoppers making sure the
square opening in the drum is pointed toward the
rear of the hopper. Repeat assembly for left and right
hoppers.
Pivot Pin
Pivot Block
Accumulator
Housing
Accumulator
Doors
Fry Diverter
Hopper
