Taylor C850, Equipment Manual

Page: 60 / 67

58
Limited Warranty On Equipment
TAYLOR COMPANY LIMITED WARRANTY ON C850 SERIES GRILL EQUIPMENT FOR
MCDONALD’S
Taylor Company, a division of Carrier Commercial Refrigeration, Inc. (“Taylor”) is pleased to provide this limited
warranty on new Taylor­branded C850 Series grill equipment available from Taylor (the “Product”) to the original
McDonald’s
purchaser only.
LIMITED WARRANTY
Taylor warrants the Product against failure due to defect in materials or workmanship under normal use and service
as follows. All warranty periods begin on the date of original Product installation. If a part fails due to defect during
the applicable warranty period, Taylor, through an authorized Taylor distributor or service agency, will provide a new
or re-manufactured part, at Taylor’s option, to replace the failed defective part at no charge for the part.
Product Part Limited Warranty Period
Taylor C850 Series Grills Parts not excluded below Two (2) years
In addition, during the two (2) year period commencing on the date of original installation of the Product, Taylor will
also provide, through an authorized Taylor distributor or service agency, all service needed to replace the failed
defective part at no charge for the service. This no­charge service shall not be available for service performed by
authorized McDonald’s service technicians. Local sales and use taxes may still apply and will be charged accordingly.
Except as otherwise stated herein, these are Taylor’s exclusive obligations under this limited warranty for a Product
failure. This limited warranty is subject to all provisions, conditions, limitations and exclusions listed below and on the
reverse (if any) of this document.
LIMITED WARRANTY CONDITIONS
1. If the date of original installation of the Product cannot be verified, then the limited warranty period begins
ninety (90) days from the date of Product manufacture (as indicated by the Product serial number). Proof of
purchase may be required at time of service.
2. This limited warranty is valid only if the Product is installed and all required service work on the Product is
performed by an authorized Taylor distributor or service agency, and only if genuine, new Taylor parts are
used.
3. Installation, use, care, and maintenance must be normal and in accordance with all instructions contained in
the Equipment Manual.
4. Defective parts must be returned to the authorized Taylor distributor or service agency for credit.
LIMITED WARRANTY EXCEPTIONS
This limited warranty does not cover:
1. Except as otherwise specifically set forth in this limited warranty, labor or other costs incurred for diagnosing,
repairing, removing, installing, shipping, servicing or handling of defective parts, replacement parts, or new
Products.
2. Normal maintenance and cleaning as outlined in the Equipment Manual, including cleaning of carbon and
grease buildup.
3. Required service, whether cleaning or general repairs, to return the Product’s cooking surface assemblies,
including the upper platen and lower plate, to an operational condition to achieve proper cooking or allow
proper assembly of release sheets and clips as a result of grease build­up on the cooking surfaces, including
but not limited to the platen and plate, sides of the shroud or top of the shroud.
4. Replacement of the Product’s cooking surfaces, including the upper platen and lower plate, due to pitting or
corrosion (or in the case of the upper platen, due to loss of plating) as a result of damage due to the impact
of spatulas or other small wares used during the cooking process or as a result of the use of cleaners,
cleaning materials or cleaning processes not approved for use by Taylor.
5. Replacement of wear items designated as Class “000” parts in the Equipment Manual, as well as any
release sheets and clips.
6. External hoses, electrical power supplies, and machine grounding.