Taylor C820, Original Operating Instructions, Page: 27 / 46

23 Model C820 & C822 Operating Procedures
120524
Step 6
Remove the release material clip, release sheet
retainer, and release material sheet. Take these
parts to the sink to be washed and rinsed.
Figure 43
Step 7
Repeat steps 1 through 6 for the other upper
platen.
Step 8
Wash and rinse the clips and retainers in the sink.
Set them aside for future use.
Step 9
Set the release material sheets aside on a clean, flat
surface next to the sink until further cleaning is
performed.
DO NOT fold, crease, or place them on
sharp objects.
Figure 44
Step 10
Scrape the lower grill surface with the grill scraper,
from front to back.
Figure 45
Step 11
Use the wiper squeegee to push residual grease into
the grease cans.
Figure 46
Step 12
Remove, empty, and reinstall the grease cans.
Figure 47