Taylor C820, Original Operating Instructions, Page: 14 / 46

10 Model C820 & C822 Operating Procedures
110531
Section 6 Operating Procedures
The Models C820 and C822 have a 24” (610 mm)
cook surface.
The Model C820 has two upper platens and the
Model C822 has one upper platen. These grills are
capable of cooking a variety of products and feature
two cooking options.
These grills provide all of the features of a flat grill,
as well as the advantages of two-sided cooking.
Note: The two platen Model C820 has been
selected to illustrate the step-by-step procedures.
For grills equipped with less than two platens,
perform the following steps as appropriate for your
grill platen configuration.
Daily Opening Procedures
Before operating the grill, the release material
sheets must be installed on the upper platens. The
release material sheets should be reversed and
rotated on a daily basis (black side vs. gray side.)
Perform the following steps for installing release
material sheets:
CAUTION: Make sure the grill is COOL
before attempting to install or remove release
material sheets.
Step 1
Slide the release sheet retainer (retention bar)
through the hemmed end of the release material
sheet.
Figure 5
Step 2
Hook the release sheet retainer on the release
material shoulder screws at the top of the upper
platen.
Figure 6