TROUBLESHOOTING GUIDE
8-3
Model C706
Troubleshooting Guide
8
15.Excessive pump
cylinder wear.
a. Inadequate or incorrect lubrication
of pump cylinder.
a. Follow lubrication procedures
carefully.
b. Incorrect ball crank rotation.
b. Contact a Taylor service technician.
- - -
16.Pitting occurring inside
the pump cylinder.
a. Cleaner was left inside the pump
cylinder.
a. After brush cleaning the pump
cylinder, allow it to air dry. Follow
disassembly procedures.
17.The ball crank of the
motor reducer is broken.
a. Pump motor rotation is incorrect.
a. Contact a Taylor service technician.
- - -
18.Too much pressure in
the freezing cylinder.
a. Plugged relief hole in the inlet tube.
a. Clean.
- - -
19.Not enough pressure in
the freezing cylinder.
a. Malfunctioning draw switch.
a. Contact a Taylor service technician.
- - -
Problem
Probable Cause
Remedy
Page
Ref.
Summary of Contents for C706
