Adjust Alarm Volume
The timer has 4 alarm volume settings: off, low (65
decibels), medium (75 decibels), and high (85 decibels).
Press “
VOL
”
(TIMER/CLOCK)
to cycle through the volume
settings while in TIMER mode. (Bell “ “ icon = OFF. One
volume icon bar = low. Two volume icon bars = medium.
Three icon volume bars = high.)
Count up feature
The timer will also count up. Press “
START/STOP
” when
the timer reads “
00:00
” and the timer will count up. Press
“
START/STOP
” again to pause and start timing. Press “
HR
”
and “MIN” at the same time to reset to zero.
Backlight feature
Press the “
LIGHT
” button to activate a backlight for 4
seconds.
Specifications
• Heat resistant LCD up to 167°F (75°C)
• Water resistant IP65 rated to withstand moisture and
water splashes
• Impact resistant up to a 4 foot drop
• 4 adjustable volume settings
• 12 hour clock function
• Backlight
• Times up to 24 hours, 59 minutes, 59 seconds
• Counts up or counts down
• Recalls last timing event
• Operates on 2 AAA batteries (included)
One year limited warranty
Taylor® warrants this product to be free from defects in
material or workmanship (excluding batteries) for one
(1) year for the original purchaser from date of original
purchase. It does not cover damages or wear resulting
from accident, misuse, abuse, commercial use, or
unauthorized adjustment and/or repair.
If service is required, do not return to retailer. Should this
product require service (or replacement at our option),
please pack the item carefully and return it prepaid,
along with store receipt showing the date of purchase
and a note explaining reason for return to:
Taylor Precision Products
2220 Entrada Del Sol, Suite A
Las Cruces, New Mexico, 88001 USA
There are no express warranties except as listed above.
This warranty gives you specific legal rights, and you may
have other rights which vary from state to state.
For additional product information, or warranty
information outside the USA, please contact us through
www.taylorusa.com.
Made in China to our exact specifications.
©2011 Taylor Precision Products and its affiliated
companies, all rights reserved. Taylor® and Leading the
Way in Accuracy® are registered trademarks of Taylor
Precision Products and its affiliated companies. All rights
reserved.
5863 10.11
