30
Parts
Model 430
061031
Parts Warranty Explanation
Class 103 Parts:
Warranty is extended 1 year from the original date of
freezer installation.
Class 000 Parts
:
Wear Items - no warranty.
Beater Motor:
Warranty is extended two years from the original date of
freezer installation.
Freezing Cylinder
:
This item is covered five years from the original date of
installation.
Compressor:
This item is covered five years from the original date of
installation.
CAUTION: Warranty is valid only if required service work is provided by an Authorized Taylor Service
Technician.
NOTE: Taylor reserves the right to deny warranty claims on equipment or parts if a non
−
approved
refrigerant was installed in the machine, system modifications were performed beyond factory
recommendations, or it is determined that the failure was caused by neglect or abuse.
Compressor Warranty Disclaimer
The refrigeration compressor on this machine is
warranted for the term indicated on the warranty card
accompanying this machine. However, due to the
Montreal Protocol and the U.S. Clean Air Act
Amendments of 1990, many new refrigerants are
being tested and developed; thus seeking their way
into the service industry. Some of these new
refrigerants are being advertised as drop-in
replacements for numerous applications. It should be
noted that, in the event of ordinary service to this
machine’s refrigeration system, only the refrigerant
specified on the affixed data label should be used. The
unauthorized use of alternate refrigerants will void
your compressor warranty. It will be the owners’
responsibility to make this fact known to any
technicians they employ.
It should be noted, that Taylor does not warrant the
refrigerant used in its equipment. For example, if the
refrigerant is lost during the course of ordinary service
to this machine, Taylor has no obligation to either
supply or provide its replacement either at billable or
unbillable terms. Taylor does have the obligation to
recommend a suitable replacement if the original
refrigerant is banned, obsoleted, or no longer available
during the five year warranty of the compressor.
Taylor will continue to monitor the industry and test
new alternates as they are being developed. Should a
new alternate prove, through our testing, that it would
be accepted as a drop-in replacement, then the above
disclaimer would become null and void. To find out the
current status of an alternate refrigerant as it relates to
your compressor, call the local Taylor Distributor or the
Taylor Factory. Be prepared to provide the
model/serial number of the unit in question.
Summary of Contents for 430 Torque
