Taylor 390 Operator'S Manual Download Page 32

10-2  

LIMITED WARRANTY ON EQUIPMENT

Model 390 

Limited Warranty on Equipment 

10

condensers.

3. Replacement of wear items designated as Class “000” parts in the Taylor Operator's Manual.
4. External hoses, electrical power supplies, and machine grounding.
5. Parts not supplied or designated by Taylor, or damages resulting from their use.
6. Return trips or waiting time required because a service technician is prevented from beginning warranty service work 

promptly upon arrival.

7. Failure, damage, or repairs due to faulty installation, misapplication, abuse, no or improper servicing, unauthorized 

alteration, or improper operation or use as indicated in the Taylor Operator's Manual, including but not limited to the 
failure to use proper assembly and cleaning techniques, tools, or approved cleaning supplies.

8. Failure, damage, or repairs due to theft, vandalism, wind, rain, flood, high water, water, lightning, earthquake, or any other 

natural disaster, fire, corrosive environments, insect or rodent infestation, or other casualty, accident, or condition beyond 
the reasonable control of Taylor; operation above or below the electrical or water supply specification of the Product; 
components repaired or altered in any way so as to, in the judgment of the Manufacturer, adversely affect performance, 
or normal wear or deterioration.

9. Any Product purchased over the Internet.
10. Failure to start due to voltage conditions, blown fuses, open circuit breakers, or damages due to the inadequacy or 

interruption of electrical service.

11. Electricity or fuel costs, or increases in electricity or fuel costs for any reason whatsoever.
12. Damages resulting from the use of any refrigerant other than that specified on the Product's data label will void this 

limited warantty.

13. Any cost to replace, refill, or dispose of refrigerant, including the cost of refrigerant.
14.

ANY SPECIAL, INDIRECT, OR CONSEQUENTIAL PROPERTY OR COMMERCIAL DAMAGE OF ANY NATURE 
WHATSOEVER.

 Some jurisdictions

 

do not allow the exclusion of incidental or consequential damages, so this limitation 

may not apply to you.

This limited warranty gives you specific legal rights, and you may also have other rights that vary from jurisdiction to 
jurisdiction.

LIMITATION OF WARRANTY

THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, CONDITIONS, AND/
OR REMEDIES UNDER THE LAW, INCLUDING ANY IMPLIED WARRANTIES OR CONDITIONS OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE ORIGINAL OWNER'S SOLE REMEDY 
WITH RESPECT TO ANY PRODUCTS SHALL BE REPAIR OR REPLACEMENT OF DEFECTIVE COMPONENTS 
UNDER THE TERMS OF THIS LIMITED WARRANTY. ALL RIGHTS TO CONSEQUENTIAL OR INCIDENTAL 
DAMAGES (INCLUDING CLAIMS FOR LOST SALES, LOST PROFITS, PRODUCT LOSS, PROPERTY DAMAGES, 
OR SERVICE EXPENSES) ARE EXPRESSLY EXCLUDED. THE EXPRESS WARRANTIES MADE IN THIS LIMITED 
WARRANTY MAY NOT BE ALTERED, ENLARGED, OR CHANGED BY ANY DISTRIBUTOR, DEALER, OR OTHER 
PERSON, WHATSOEVER

.

LEGAL REMEDIES

The owner 

must 

notify Taylor in writing by certified or registered letter to the following address,of any defect or complaint with 

the Product, stating the defect or complaint and a specific request for repair, replacement, or other correction of the Product 
under warranty, mailed at least thirty (30) days before pursuing any legal rights or remedies.

Taylor Company 

750 N. Blackhawk Blvd.

Rockton, IL  61072, U.S.A.

Summary of Contents for 390





































Reviews: