Maintenance, Service, and Repair
Drive Axle
Page 8
Main Housing Disassembly
Both axle ends, brakes, and nose reduction (if equipped)
must be removed before proceeding with this section.
1.
With nose box, wheel ends, axle shafts and brakes
removed; insert a long bar or tube 1 to 1-1/2 inch
diameter thru the axle differential section and both
axle housings. This will prevent dropping of the
differential and bevel ring gear assembly when the
case halves are split.
2.
Remove the eleven capscrews, washers and
locknuts securing the two axle housing halves.
Remove the plain housing half.
3.
Remove differential and bevel ring gear assembly. If
bearing replacement is required, use a suitable
bearing puller to remove the housing half tapered
bearing cups from the housing halves.
4.
Match mark the plain differential case half and
flanged differential case half to aid alignment at
reassembly.
5.
Remove the eight differential case capscrews and
washers . Separate the plain differential case half
from the flanged differential case half.
6.
Remove the two differential side gears, two side gear
thrust washers, four differential pinions, four pinion
thrust washers and the differential spider.
7.
If replacement of the bevel ring gear is required,
remove the twelve capscrews, washers and locknuts
securing the bevel ring gear to the flanged differential
case half. Press the bevel ring gear off of the flanged
differential case half using a suitable press.
8.
Remove the bevel pinion and cage assembly and
pinion cage gasket from the remaining housing half.
9.
For bevel pinion gear or bearing replacement, place
the bevel pinion and cage assembly in a suitable
press and press the bevel pinion from the pinion cage
assembly. The outer bearing cone and pinion bearing
selective spacer will be pressed free along with the
pinion cage assembly.
10. Remove the bevel pinion inner roller bearing snap
ring. Press the bevel pinion inner roller bearing and
inner tapered bearing cone free from the bevel pinion
utilizing a suitable press.
11. Press tapered bearing cups free from the pinion cage
utilizing a suitable press.
Summary of Contents for TC-030-60L
