Taylor-Dunn SC 0-90, Operation, T Roubleshooting And Replacement Parts Manual

Page: 8 / 130

INTRODUCTION
Page-4
HOW TO IDENTIFY YOUR VEHICLE
This manual applies to vehicles with the same model and serial numbers listed on the front cover.
These vehicles are designed for driving on smooth surfaces in and around facilities such as industrial plants,
nurseries, institutions, motels, mobile home parks, and resorts. They are not to be driven on public highways.
The locations of the model and serial numbers are illustrated below:
This vehicle conforms to requirements for Type E vehicles as described in O.S.H.A. Standard Section 29 CFR
1910.178 (Powered Industrial Trucks) and with all applicable portions of the American National Standard for
Personnel and Burden Carriers (ANSI B56.8).
This vehicle is not designed to be driven on public roads or highways. It is available in maximum
designed speeds ranging from 4 to 10 mph. Do not exceed the maximum designed speed.
Exceeding the maximum designed speed may result in steering difficulty, motor damage, and/
or loss of control. Do not exceed locally imposed speed limits. Do not tow at more than 5 mph.
The model SC 1-00 and SC 0-90 look identical from the exterior. The
easiest method to determine your model is to look at the rear drive axle.
SC 0-90 Drive axle SC 1-00 Drive axle
Depending on the type of data plate, it will be in one
of two locations as shown above