Taylor-Dunn R 380-36, Operator'S And Service Manual

Page: 28 / 260

SAFETY RULES AND OPERATING INSTRUCTIONS
Safety Rules
Page 16
PREVENTATIVE MAINTENANCE SCHEDULE
MAINTENANCE
LEVEL
HOUR
INTERVAL
1
MAINTENANCE TO BE PERFORMED
2,3
1 500
Inspect the brake system including the park brake and mounting
harware
Inspect the steering system, tighten the steering shaft coupler on
the steering gear input shaft
Lubricate the vehicle, check for leaks
Inspect safety interlocks
Inspect front and rear wheel bearings
Inspect and adjust fork collar bearings (3-wheel trucks only)
Inspect and tighten all nuts and bolts. First 500 hours and then
every 1000 hours.
2 1000
Inspect and tighten all nuts and bolts
Clean and repack front wheel bearings
Inspect and tighten all wire connections
Inspect the motor brushes and commutator
Inspect the king pin bushings
Check front end alignment
3 2000
Change oil in the drive and rear axle
Flush hydraulic brake system
Inspect suspension bushings
Replace brake pedal/treadle return spring
Inspect frame for damage
STANDARD PERIODIC MAINTENANCE SCHEDULE
FOR THE SMART VIEW DISPLAY
NOTE: The maintenance function is optional. Your vehicle may be equipped with a customized maintenance
schedule
1, 2, 3 - See notes on following pages.