![background image](http://html2.mh-extra.com/html/taylor-dunn/bigfoot/bigfoot_operators-manual_3771679047.webp)
Page 47
B5-440-36 / B5-440-48 / B5-540-48XL / BF-030-48Operator Manual
MB-440-07
NOTICE
This vehicle is equipped with regenerative
braking. Follow these steps before towing
this vehicle.
1) To tow this vehicle, the start switch
MUST be in the “OFF” position.
2) Place the Directional Control switch
in the center “OFF” position.
Failure to follow these instructions may
result in damage to the vehicle.
Note: The tow-bar for the XL is located under the floorboard.
An illustration was not available at time of publication.
Towing This Vehicle
Note: This vehicle may be equipped with an
automatic electric park brake. The Park
Brake Bypass switch must be engaged or
the brake removed from the motor before
towing the vehicle.
To tow this vehicle, attach a tow strap to the
front bumper tow-bar. Use another driver to
steer this vehicle while it is being towed. Be
sure the driver uses the brakes when the towing
vehicle slows or stops.
Do not tow the vehicle faster than 5 m.p.h. or its
maximum designed speed, whichever is lower.
If at all possible, this vehicle should be placed
on a carrier, rather than towing.
Trailering This Vehicle
Use tie points illustrated below to securely strap the vehicle to a trailer or truck bed.
The only personnel authorized to remove the automatic electric park brake from
any Taylor-Dunn vehicle is a factory authorized service technician. Repairs made by
unauthorized personnel may result in damage to the vehicle’s systems which could
lead to an unsafe condition resulting in severe bodily injury and/or property damage.
Unauthorized repairs may also void the vehicle’s warranty.
WARNING