![background image](http://html2.mh-extra.com/html/taylor-dunn/bigfoot/bigfoot_operators-manual_3771679056.webp)
Page 56
B5-440-36 / B5-440-48 / B5-540-48XL / BF-030-48 Operator Manual
MB-440-07
Lester Summit II Charger
Description of Operation
The Summit II charger is designed as
an automatic charger. It is available with
charging profiles for SLA and FLA batteries.
Refer to the factory specifications on
the charger for the type of battery it was
configured for when manufactured. Use of
different batteries not listed may result in
premature failure of the batteries.
The charger turns itself on when it is plugged into the wall outlet and turns off when the batteries
are fully charged. The charger continues to monitor the battery voltage and if the battery voltage
drops below a threshold value, then the charger will turn on again for a short cycle to keep the
batteries topped off.
There are three lamps on the charger used to indicate the active charging status and if any
faults occurred during the charging cycle.
The charger features Bluetooth® wireless communication, which enables a smart phone or
tablet running the ChargerConnect™ app to be used to:
•
View the real-time charge cycle status
•
Download charge cycle history records from the charger
•
Upload charge cycle history records to the Cloud for access anywhere in the world
• Select the active battery profile
• Download new battery profiles from the Cloud
• Upload battery profiles to the charger
Detailed operating instructions and the ChargerConnect™ app can be downloaded from the Lester
Electrical web site.
http://www.lesterelectrical.com
Instructions for using the ChargerConnect™ app are also available on the Lester web site.
The charger data plate includes a label with the Factory Specifications programed in the charger
at time of manufacture. If the program settings are changed then a new label should be applied
with the specifications. Replacement labels are not available from the factory.