Taylor-Dunn BIGFOOT B5-440-36, Operation, T Roubleshooting And Replacement Parts Manual

Page: 22 / 130

Lubrication
Page 22
B5-440-36 / B5-440-48
MB-440-01
LUBRICATION AND FLUIDS CHART
HAZARDOUS WASTE DISPOSAL
This vehicle contains various components and/or fluids that may be classified as hazardous waste.
This includes but is not limited to Lead, Acid, Oil, Grease.
The brake linings originally installed by the factory do not contain asbestos. However, since it is possible that asbestos
brake linings were installed as replacement parts, brake linings should be handled as hazardous waste.
The requirements for disposal of hazardous waste vary by location. Consult your local regulations regarding the
proper disposal of hazardous waste products.
Assembly Component Capacity Lubricant
Front Axle:
3: Wheel Bearings 2 - NLGI Grade 2 lithium high temp Bearing Grease
> Refer to procedure later in this section
4: King Pin 4 - NLGI Grade 2 lithium multi-purpose grease
Suspension:
5: Rear spring eyes 6 NLGI Grade 2 lithium multi-purpose grease
Steering:
1: Steering Rack 1 NLGI Grade 2 lithium multi-purpose grease
2: 90° Steering Gear 1 NLGI Grade 2 lithium multi-purpose grease
6: Collapsible steering shaft 1 NLGI Grade 2 lithium multi-purpose grease
Brake Fluid:
Master Cylinder 1 DOT 3, Meets or exceeds SAE J1703
Linkages:
Park brake handle 1 - Multi-purpose spray lubricant
Rear Transaxle:
7: Drain Plug (ref)
8: Level Plug (ref)
9: Fill Plug 1 1.4-1.9 Liters SAE 80W90 Gear Oil
10: Motor Coupler 1 Part # 94-421-34 Moly Paste Grease
# of Locations