tayco Norris Boardroom Table 1 Surface, Installation Manual

Page: 9 / 20

Norris boardroom table – 1 Surface
Figure 2
Figure 3
Tools & Hardware Needed
8540-0789_SCREW 8540-1282
Drill Box Wrench Robertson # 2 #10 X 1" Pan Head
Screw (6X) 3/8-16" X 1-1/2"
Hex Bolt (8X)
2.
To install the table base; position
and attach the steel gable to
bridge, using 3/8-16” X 1 1/2”
Hex bolt, (Figure 2).
Repeat this procedure to install
the other steel gable.
Note: The steel gables for Video
boardroom tables have two
different sizes. The wide one is
for the wider side of the surface.
3.
Position the base using the pre-
drilled positioning holes and
attach it to table top using #10 X
1” Oval Head Screw, (Figure 3).
Continued on the next page >>
FEBRUARY 2020 norris 6