tayco Norris Boardroom Table 1 Surface, Installation Manual

Page: 14 / 20

Norris boardroom table – 2 Surfaces
Figure 2
Figure 3
Tools & Hardware Needed
8540-0789_SCREW MENDPLATE-BLK 8540-0770_Dowel
Drill Box Wrench Robertson # 2 #10 X 1" Pan Head
Screw (8X) Top Bolt (4X) Mending Plate (2X) Wooden Dowel (2X)
4.
Place the 2 surfaces on top of
table base and attach them
together by inserting wooden
dowels, (Figure 2).
5.
Place the top bolt into the
groove. Tighten the bolt using
a box wrench, (Figure 3).
6.
Attach the mending plates,
using #10 X 1” Pan Head
Screws, (Figure 3).
Continued on the next page >>
FEBRUARY 2020 norris 11