tayco Norris Boardroom Table 1 Surface, Installation Manual

Page: 10 / 20

Norris boardroom table – 1 Surface
Figure 4
Figure 5
Tools & Hardware Needed
8540-0789_SCREW
Drill Robertson # 2 #10 X 1" Pan Head
Screw (12X)
4.
Securely fasten the base, using
#10 X 1” Pan Head Screws,
(Figure 4).
5.
Lift the table into an upright
position; level and adjust the
glides if necessary.
6.
Set the power grommet into
the hole of the table top and
lay the electrical wires and
communication cables in the
bridge and gables, (Figure 5).
Continued on the next page >>
FEBRUARY 2020 norris 7