tayco Cosmo, Installation Manual, Page: 106 / 111

1. Inspect ceiling condition before
beginning installation. If ceiling
material is acoustical tile, remove
tile above power pole before
attaching the pole to the panel.
2. Attach 8-inches of the power
pole to the panel frame with the
two self-tapping screws supplied,
(Figure 1).
3. Remove the clamp on the open
end of the harness, so it can be
fed through the panel
connectors, (Figure 2).
4. Lay the cable in the power pole.
Clip the two halves of the power
pole together, (Figure 3).
FIGURE 1
FIGURE 2
FIGURE 3
power pole installation
8-INCHES
POWER POLE
CABLE
POWER POLE
CLAMP
#10 1-INCH SELF
TAPPING SCREW
MARCH 2017 cosmopolitan 106