VT3
17
3
STORAGE AND TRANSPORT
3.1
General Instructions
࣑
ATTENTION
+
Make sure that the equipment is protected from moisture, dust and dirt in the selected
storage location. The storage location should be dry and well ventilated and have a constant
ambient temperature between 5°C and 45°C.
⚠
WARNING
+
The storage location should be chosen so that improper use by third parties or children can
be prevented.
4
TROUBLESHOOTING, CARE AND MAINTENANCE
4.1
General Instructions
⚠
WARNING
+
Do not make any improper changes to the equipment.
⚠
CAUTION
+
Damaged or worn components may affect your safety and the life of the equipment.
Therefore, immediately replace damaged or worn components. In such a case, contact the
contract partner. The equipment must not be used until it has been repaired. If necessary,
use only original spare parts.
࣑
ATTENTION
+
In addition to the instructions and recommendations for maintenance and care given here,
additional service and/or repair work may be necessary; this must only be carried out by
authorised service technicians.
4.2
Faults and Fault Diagnosis
The equipment undergoes regular quality controls during production. Nevertheless, faults or
malfunctions may occur. Frequently, individual parts are responsible for these disturbances, an
exchange is usually sufficient. Please refer to the following overview for the most common errors and
how to correct them. If the equipment still does not function properly, contact your contract partner.
Error
Cause
Solution
The plate does not
start
Power cable is not properly
inserted.
Insert power cable.
Power switch isn't switched on.
Flip power switch to on.
A fuse is blown out.
Contact your contract partner.
Summary of Contents for VT3
