Taurus Ultra Trainer TF-UT-2, Assembly And Operating Instructions Manual, Page: 27 / 49

27
3.5.6 Watt Controlled Programme (W)
1. Use the PROGRAM button or the +/- buttons to
select the watt controlled programme (W) and
confirm with the MODE button (Figure 10).
2. Set the desired target value with the +/- buttons
and confirm with the MODE button.
L
NOTICE
The default value is 120 (Figure 11).
3. Set the time value with the +/- buttons and
confirm with the MODE button.
4. To start the programme, press the START/STOP
button.
L
NOTICE
During your workout, the watt level is
automatically adjusted based on your set watt
value, the current RPM and your training speed.
5. To pause the programme, press the START/STOP
button again.
6. To end the programme, briefly press the RESET
button in the paused programme.
Figure 10
Figure 11