manualshive.com logo in svg

Taurus Ultra Trainer TF-UT-2, Assembly And Operating Instructions Manual, Page: 21 / 49

Share
Download
Taurus Ultra Trainer TF-UT-2 Assembly And Operating Instructions Manual Download Page 21

21

3.4 

Standby Mode

As soon as the console receives no signal for at least 4 minutes, it goes into standby mode.
To exit standby mode, start moving the pedals or make an entry on the console.

3.5 

Programmes

The following programmes are available:

 

+

Quick Start programmes:    

1

 

+

Manual programme:  

 

1

 

+

Pre-set programmes:  

 

12

 

+

User-defined programmes:    

4

 

+

Heart Rate Controlled programmes:   4

 

+

Watt controlled programmes:  

1

3.5.1 

Quick Start Programme

1.  Use the PROGRAM button or the +/- buttons to select the manual programme (M) and confirm 

with the MODE button.

2.  To start the Quick Start programme, press the START/STOP button.

 

L

NOTICE

During the workout it is possible to adjust the resistance level with the +/- buttons.

All values will be counted up.

3.  To pause the programme, press the START/STOP button again.
4.  To end the programme, briefly press the RESET button in the paused programme.

Summary of Contents for Ultra Trainer TF-UT-2


















































Reviews:

No comments