Taurus RUN X, Assembly And Operating Instructions Manual

Page: 15 / 36

Transporation Wheel
RUN X
15
Step 6: Assembly of the bottle holder
Attach the bottle holder (110) to the left upright post (2) with two M4*16 screws (111).
Step 7: Alignment of the feet
If the floor is uneven, you can stabilize the treadmill by turning the setting screws under the main
frame.
1. Lift the treadmill on the desired side and rotate the setting screws under the main frame.
2. Rotate the screws clockwise in order to remove them and to raise the running surface.
3. Rotate them counterclockwise in order to lower the running surface.