ENGLISH
29
28
When mounting the gasket, ensure that the thick side
is in contact with the lid.
CAUTION.
Never use the lid without first ensuring that the
gasket is properly fitted. (Figures 6 and 7).
CAUTION.
Never open the jug lid when the appliance is
running to prevent the risk of overflowing and
/ or burns. Before opening the jug lid, stop the
Mycook and wait a few seconds until the blades
have come to a complete stop.
The jug
(Figure 8)
The jug has a maximum capacity of 2 litres. Contains
1 litre, 1.5 litre and 2 litre measurement levels in the
interior.
To remove lid from the jug:
Slide the handle tab downwards, pulling it to remove
it once the lid becomes detached.
(Figure 9).
To fit the lid on the jug:
Insert the back flap into the handle slot
(Figure 10)
,
lower the front part and push the lid in the direction
indicated by the arrow until you hear a click
(Figure
11)
, indicating that it has properly locked.
To attach the jug:
Take the jug and turn it anti-clockwise until the arrow
on the jug base lines up with the central unit lock.
(Figure 12).
To detach the jug:
Take the jug by the handle and turn it clockwise until it
stops (with the two arrows lined up) and lift it upwards
(Figure 13).
Jug lid
(1)
Figure 7
(1)
This thick side of the board should be
mounted in contact with the lid.
Figure 8
Figure 9
Figure 10
Figure 11
Manual Mycooks.indb 28
12/11/15 16:27
