Taurus ELECTRO G2 Flight Manual And Maintenance Manual Download

Page: 95 / 96

TAURUS ELECTRO

www.pipistrel.si

REV. 3

Warranty statement

Warranty applies to individual parts and components only.

The warranty does not include costs related to the transport of the product, goods and spare parts as

well as costs related to the merchandise’ temporary storage. Pipistrel d.o.o. does not offer guarantee for

the damage caused by every day use of the product or goods. Pipistrel d.o.o. does not guarantee for the

lost profit or other financial or non-financial damage to the client, objects or third party individuals .

Warranty voids:

- in case that the customer has not ratified the General Terms of ownership with his/her signature;

- in case the aircraft or the equipment is not used according to the Pipistrel d.o.o.’s instructions or

aircraft’s manual and eventual supplemental sheets;

- in case when the original additional and/or spare parts are replaced with non-original parts;

- in case additional equipment is installed without Pipistrel d.o.o.’s prior knowledge;

- in case the purchased goods were changed or modified in any way;

- in case when the defect is caused by user’s deficient maintenance, inappropriate care and/or cleaning,

user’s negligent handling, user’s inexperience, due to use of product and/or its individual parts or

components in inadequate conditions, due to prolonged use of the product or goods, due to product

and/or parts’ over-stressing (even for a short duration), due to the fact a repair was not carried out

neither by Pipistrel d.o.o. nor by its authorised personnel;

- in case parts that become worn out by every day use (e.g. the covers, pneumatics, electric instruments,

electric installation, bonds and bindings, cables, brake plates, capacitors, cooling devices, various pipes,

spark-plugs, exhaust systems…)

- the owner must ensure regular motor check-outs and maintenance as per the instructions of Pipistrel.

Non compliance with the conditions listed above will void warranty.

The Pipistrel warranty statement is updated occasionally, please

make sure to request the latest version from Pipistrel.

Summary of Contents for ELECTRO G2

































































































Search results

Summary of Contents for ELECTRO G2

Reviews:

Related manuals for ELECTRO G2

Brands by name

Popular brands

Taurus ELECTRO G2, Flight Manual And Maintenance Manual

Search results

Summary of Contents for ELECTRO G2

Reviews:

Related manuals for ELECTRO G2

Brands by name

Popular brands