Taurus ELECTRO G2, Flight Manual And Maintenance Manual

Page: 83 / 96

83
TAURUS ELECTRO
www.pipistrel.si
REV. 3
Handling and maintenance
Keeping your aircraft in perfect shape
CAUTION!
ALWAYS WHEN USING WATER TO CLEAN THE AIRCRAFT, MAKE SURE THE WATER
DOES NOT ENTER THE ENGINE COMPARTMENT INSIDE THE AREA WITH ELECTRICAL COMPO-
NENTS. COVER THE GAPS IF NECESSARY. AVOID USING PRESSURISED WATER TO CLEAN THE
FUSELAGE.
Precautions
1) DO NOT USE ANY aggressive cleaning solutions and organic solvents, also the window cleaning
spray, benzene, acetone, aggressive shampoos etc.
2) If you must use an organic solvent (acetone) on small areas to remove certain glue leftovers
or similar, the surface in question MUST be polished thereafter. The only section where polishing
should be avoided is the edge on the wing where the sealing gasket is applied.
3) When flying in regions with a lot of bugs in the air, you should protect the leading edges of the
airframe before flight (propeller, wings, tail) with Antistatic furniture spray cleaner: “Pronto (transpar-
ent), manufacturer: Johnson Wax (or anything equivalent) – Worldwide”, approximate price is only $3
USD / €3 EUR for a 300 ml spray bottle. Using such spray, do not apply it directly onto the wing but
into a soft cloth instead (old T-shirts are best).
4) After having finished with flight activity for the day, clean the leading edges of the airframe as
soon as possible with a lot of water and a drying towel (chamois, artificial leather skin). This will be
very easy to do if you applied a coat of Pronto before flight.
Detailed handling (Airframe cleaning instructions)
Every-day care after flight
Bugs, which represent the most of the dirt to be found on the airframe, are to be removed with clean
water and a soft mop (can be also drying towel, chamois, artificial leather skin).
To save time, soak all the leading edges of the airframe first. Make sure to wipe ALL of the aircraft
surface until it is completely dry at the end.
Clean the propeller and the areas with greasy spots separately using a mild car shampoo with wax.
CAUTION!
DO NOT, UNDER ANY CIRCUMSTANCES ATTEMPT TO USE AGGRESSIVE CLEANING
SOLUTIONS, AS YOU WILL SEVERELY DAMAGE THE LACQUER, WHICH IS THE ONLY PROTECTIVE
LAYER BEFORE THE STRUCTURAL LAMINATE.
When using the aircraft in difficult atmospheric conditions (intense sunshine, dusty winds, coastline,
acid rains etc.) make sure to clean the outer surface even more thoroughly.
If you notice you cannot remove the bug-spots from the leading edges of the aircraft, this means the
lacquer is not protected any more, therefore it is necessary to polish these surfaces.
CAUTION!
DO NOT, UNDER ANY CIRCUMSTANCES ATTEMPT TO REMOVE SUCH BUG-SPOTS
WITH ABRASIVE SPONGES AND/OR ROUGH POLISHING PASTES.