Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with
due care. Keep this manual in a safe place, so that
the information is available at all times. If you give
the equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents
which arise due to non-observance of these
instructions and the safety information.
1. Safety regulations
Please refer to the booklet included in delivery for
the safety instructions.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Layout (Fig. 1)
1.
Torque selector
2. Changeover switch
3. ON/OFF switch
4. Battery pack
5. Pushlock button
6. Selector switch for 1st gear to 2nd gear
7. Quick-change drill chuck
8. Charging adapter
9. Battery charger
10. Battery capacity indicator
11. Switch for battery capacity indicator
3. Proper use
The cordless drill/screwdriver is designed for
tightening and undoing screws, as well as for
drilling in wood, metal and plastic.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or
injuries of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be
voided if the machine is used in commercial,
trade or industrial businesses or for equivalent
purposes.
4. Technical data
Motor power supply:
10.8V DC
Idling speed:
0-350 rpm
0-1200 rpm
Torque settings:
19 + 1
Forward and reverse rotation:
Yes
Chuck capacity:
10mm
Battery charging voltage:
12V DC
Battery charging current:
500 mA
Mains voltage for charger:
240V~50 Hz
Weight:
1.2 kg
Max. screw diameter:
6mm
Sound and Vibration
Sound and vibration values were measured in
accordance with EN 60745.
L
pA
sound pressure level
64 dB(A)
K
pA
uncertainty
3 dB
L
WA
sound power level
75 dB(A)
K
WA
uncertainty
3 dB
Wear ear-muffs.
The impact of noise can cause damage to
hearing.
Total vibration values (vector sum of three
directions) determined in accordance with
EN 60745.
Screwing without hammer action
Vibration emission value a
h
≤
0,153 m/s
2
K uncertainty = 1,5 m/s
2
6
After Sales Support TEL: 1300 922 271 EMAIL: [email protected]
