10
2.3
Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
1. Carefully remove the upper carton cover from
the product.
2. Place the cover for the backrest and the pillow
on the massage chair.
3. Fold down the sides of the bottom carton.
4. Move the product to the desired position using the
transportation wheels. Please take notice of the instructions
given in section 1.4 and chapter 4.
5. Plug the power plug into a wall outlet that complies with the
instructions in the chapter on electrical safety.
࣑
ATTENTION
+
The equipment must not be connected to a multiple
socket, otherwise it cannot be guaranteed that the
equipment will be supplied with sufficient power.
Technical errors can result.
+
Make sure that the power cord is not pinched under the
product to prevent damage to the power cord.
6. Set the power switch on the back of the massage chair to “I” to switch on
the massage chair.
࣑
ATTENTION
Make sure that you switch off the massage chair via the control panel and
set the power switch to “O” after each use.