Taurus Alpatec MALBORK 600, Manual

Page: 15 / 105

-Fix the wall bracket as you think appropriate,
using plugs, screws, and adhesive…
-Taking into account the separation distances
mentioned above, place the wall support in the
required position and mark the drilling points on
the wall. (Fig.1).
-Drill into the wall where marked and insert the
rawlplugs.
-Place the support by matching the holes with
the rawlplugs and screw in firmly.
-Make sure that the bracket is firmly fixed; it
should be able to support twice the weight of the
appliance.
-Fit the appliance into the wall support.
FITTING THE BASE FEET:
-To assemble the base feet, place the appliance
face down.
-Position the base feet on the body of the appli-
ance using the (G) screws. (Provided with the
appliance).
-Stand the appliance up again so as to check
that the base feet work properly.
INSTRUCTIONS FOR USE
BEFORE USE:
-Prepare the appliance according to the function
you wish to use:
USE:
-Unroll the cable completely before plugging it in.
-Connect the appliance to the mains.
-Turn the appliance on, by using the on/off switch
(A).
-Turn the appliance on, by using the on/off button
(1).
-For first time use, the screen will show as
follows:
CLOCK AND DAY OF WEEK SETTING:
-The clock and day of week are in the upper left
part of the LCD screen (I) and (II).
-Press the button (3) to adjust the time. Press (4)
or (5) to select the time.
-Press the button (3) to adjust the minutes. Press
(4) or (5) to select the time.
-Press the button (3) to adjust the days. Press
(4) or (5) to select the time.
1 Monday
2 Tuesday
3 Wednesday
4 Thursday
5 Friday
6 Saturday
7 Sunday
-Press the button (3) to confirm and end the date
and time set up.
PROGRAM SELECTION:
-Press the button (2) to adjust the program.
-Press (4) or (5) to select the desired program,
once selected press (2) to confirm.
- Free
- Daily
- Weekly
- Window sensor
FREE PROGRAM
-Make sure that appears on the screen,
which means that the device is in free program.
- Temperature selection
-Choose the desired temperatura using the
buttons (4) or (5) and wait for the indicator to
stop flickering.
-The temperatura range can be adjusted be-
tween 10-35ºC.
-When the room temperatura is higher than the
selected temperature, the appliance will stop
heating.
-The indicator appears on the LCD screen
when the appliance is heating up.
- Timer selection
-To program an operating time, press the button
(3) for 5 seconds until the clock icon (XII) ap-
pears on the screen.
-Press (4) or (5) to select the time 30 minutes
intervals (máximum 24 hours).
-To cancel the programmed time, press the
button (3) for 5 seconds until it disappears from
the screen.