18
DC16
MANUFACTURER’S DECLARATION OF INCORPORATION
(in accordance with European Directive 2006/42/EC App. II.B)
Manufacturer:
TAU S.r.l.
Address:
Via E. Fermi, 43
36066 Sandrigo (Vi)
ITALY
Declares
under its sole responsibility, that the product:
Electronic control unit
designed for automatic movement of:
Sliding doors
for use in a:
Residential / Communities environment
complete with:
Battery charger
Model:
DC16
Type:
DC16
Serial number:
see silver label
Commercial name:
Control panel for for automatic sliding door
opener
Has been produced for incorporation on an access point (
swing gate
) of for assembly with other devices used to
move such an access point, to constitute a machine in accordance with the Machinery Directive 2006/42/EC.
Also declares
that this product complies with the essential safety requirements of the following EEC directives:
- 2014/35/EU Low Voltage Directive
- 2014/30/EU Electromagnetic Compatibility Directive
and, where required, with the Directive:
- 2014/53/EU Radio equipment and telecommunications terminal equipment
Also declares that
it is not permitted to start up the machine
until the machine in which it is incorporated or of
which it will be a component has been identified with the relative declaration of conformity with the provisions of
Directive 2006/42/EC.
References to the relevant European harmonised standards used:
EN 61000-6-2; EN 61000-6-3; EN 60335-1; ETSI EN 301 489-1 V1.9.2; ETSI EN 301 489-3 V1.6.1
EN 300 220-2 V3.1.1; EN 12453:2000; EN 12445:2000; EN 60335-2-103; EN16005..
The manufacturer undertakes to provide, on sufficiently motivated request by national authorities, all information
pertinent to the quasi-machinery.
Sandrigo, 31/10/2017
Legal Representative
_________________________________________
Loris Virgilio Danieli
Name and address of person authorised to draw up all pertinent technical documentation:
Loris Virgilio Danieli - via E. Fermi, 43 - 36066 Sandrigo (Vi) Italy
ENGLISH
Summary of Contents for DC16
Page 42: ...42 DC16 ...
Page 43: ...43 DC16 ...
