38
GNL - Rev. 07 - Mar/22
Procedures to transport the equipment
Every GNL model can be transported using the tractor three-point hitch. In order to do
so, follow the instructions below:
1. Retreat the disk harrow totally.
2. Place the drawbar in the central hole of the upper and lower plates (A).
3. Articulate the hitch bar, couple the transport bar (B) to the frame and drawbar using
a pin and cotter pin (according to the instructions on the 'transport bar assembly'
page).
4. Hitch the tractor to the three-point hitch (C).
Important recommendations
1. Check the conditions of all parts retightening nuts and bolts, especially the ones on
the disc gangs. If they work loose, there may be damages to the axles and other
components.
2. Lubricate all grease fittings appropriately. (Check the lubrication page).
6. Set-up instructions
C
C
A
A
B
B
