29
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
GNACR
Working preparation
Important recommendations
The traction bar should remain loose during working and fixed on transportation.
Never remove the hoses without relieving the control valve pressure.
Before working, check the condition of all parts and retighten nuts and bolts, especially
the ones from the disc gangs. If the gangs work loose, they may damage the axle and
other components.
Lubricate all grease fittings appropriately. (See lubrication instructions).
To transport the harrow it is necessary to use the transport locks (A), which are coupled
to the hydraulic cylinder rods. When they are not being used, the safety locks must remain
locked to the harrow, at the appropriate place.
Use the rod stops (B) to control the depth, which are coupled to the hydraulic cylinder
rods.
A
B
